Ledstory Brass Bi-Pin Path Light cEtl Listed Low Voltage Led Landscape 12v G4 Ip65 Pathway Lights

• 12V AC/DC
• Cast brass housing with Antique Bronze finish Cast brass housing with Antique Bronze finish
• High temperature o-ring retention collar
• Clear and frosted lens options included
• Specification grade, beryllium copper socket Specification grade, beryllium copper socket
• Anti-Moisture Connections
• 20W max. halogen
• Powder-coated color options available
• 60” 18AWG wire lead
• IP65 and ETL rated
• Lifetime warranty

RL-LSS08 offers soft-level lighting with an elegant look. The frosted cylindrical lens minimizes glare while the Ledstory LED lamp provides sufficient light to cast a soft glow on any path or walking area. It is Ideal for lighting planter areas walkways etc.

Advantages for the new design dimmable integrated path light compared with the old generation:

  1. The unique and patented eagle design which can better protect your product line and will have no compete with other common design products.
  2. The glass lens can be clear and frosted to meet different customer’s request.
  3. The LED and driver modules are “integrated” inside the fixture but also can be replaced easily once any part broken.
  4. The wattage can be dimming from 2W-5W by rotting the rings under the eagle logo.
  5. The old version fixture plus G4 bulb has bad heat dispatching which offer caused the bulb burned out, while the new generation integrated modules can be good heat dispatching across the brass shell.
  6. The new design pole can match current varies of shape of hat to meet different customer’s interests.
  7. The CCT we provide 2700K and 3000K for option.

Besides of above advantages, we also provide below customized services:

  • Fixture body color customized.
  • Personal branded logo can be print in the fixture.
  • Personal color box and labels can be made.

If you have any new idea or comments on this product, we appreciated to hear from you any time.

    Installation Instructions

    Safety Instructions：
    • Turn power OFF or unplug fixture and allow it to cool before replacing lamp.
    • Lamp gets HOT quickly. Contact only switch/plug when turning on.
    • Do not touch hot lens, guard, or fixture housing until it has cooled.
    • Keep lamp away from combustibles.
    • The inner module is very hot, do not touch it until it cools down
    • Do not operate the fixture fitting with a missing or damaged shield.
    • For outdoor use only.
    • Make sure the power is turned OFF before installing or servicing this fixture.

    Installation Instruction：
    • Disconnect the transformer from the main supply
    • Remove the shield from the retaining housing
    • Assemble the internal mold into the lamp and connect it with a connector (if required)
    • Install the cover and rotate the cover on the housing to fix it on the fixture housing to make sure the leak hole is in the middle and down
    • Connect the cable to the main line through the ground plug