Ledstory Ip65 Waterproof Led Mr16 Pvc&solid Brass Antique Bronze Underground In-ground Lights Landscape Garden Lighting Fixtures

• 12V AC/DC
• Single aperture solid cast brass faceplate
• Antique Bronze finish
• Corrosion resistant non-metallic canister
• Specication grade, beryllium copper socket
• Clear lens
• Anti-moisture connections
• 20W max. halogen
• Powder-coated color options available
• 60” 18AWG wire lead
• IP65 and ETL rated
• Lifetime warranty

Product Information Card:

Name:
Single Source/1 Way Buried Lights MR16 Well Light
 In production
Factory: Ledstory Model: UG-LSS05

Basic Information:

Body： PVC&Solid Brass
Finish： Antique Bronze/
Gun Metal/Custom
Voltage： 10-15V
Power： UP to 20W
CCT： 2700K~5700K
Product Weight(kg)： 1.24
Warranty： Life-Time
IP rate： IP65
DESCRIPTION
UG-LSS05 is a sealed well light that uses an MR16 lamp. The socket is mounted on an adjustable gimbal so the lamp’s angle can be adjusted. The top is thick solid cast brass. Thick rubber gasket between the top and body of the well light for a watertight seal. The lower canister is completely sealed. The round lead wire uses a waterproof pressure fitting. We have a variety of solid cast brass top options for any in ground well lighting application.Install it with our Heavy duty PVC Well Light sleeve which provides a durable housing for all Brass In-Ground fixtures.

Installation Instructions

Safety Instructions：
• Turn power OFF or unplug fixture and allow it to cool before replacing lamp.
• Lamp gets HOT quickly. Contact only switch/plug when turning on.
• Do not touch hot lens, guard, or fixture housing until it has cooled.
• Keep lamp away from combustibles.
• The inner module is very hot, do not touch it until it cools down
• Do not operate the fixture fitting with a missing or damaged shield.
• For outdoor use only.
• Make sure the power is turned OFF before installing or servicing this fixture.

Installation Instruction：
• Disconnect the transformer from the main supply
• Remove the shield from the retaining housing
• Assemble the internal mold into the lamp and connect it with a connector (if required)
• Install the cover and rotate the cover on the housing to fix it on the fixture housing to make sure the leak hole is in the middle and down
• Connect the cable to the main line through the ground plug