Ledstory Landscape lighting wire connector

SPECIFICATIONS:

Model: 405B

Color: Black

Material: Nylon + Fiberglass

Style: Landscape lighting wire connector

Product Dimensions: Ø28.5*48.5mm

18AWG Power Source: AC/DC

Item Weight: 38.5g

Pin Finish: Nickel Plated

Special Features：12# main cable and 18# branch cable

Warranty Description:5 years

Product Information Card:

Product Name：

Ledstory Landscape lighting wire connector

 In production
Factory: Ledstory Model: 405B

Basic Information:

Body： Nylon + Fiberglass
Finish： Black
Voltage： 10-15V
Weight：  38.5g
Size： 28.5*48.5mm
Type：
Landscape lighting wire connector
Warranty： 5 years
Special Features： 12# main cable and 18# branch cable
Function Description：
1. Better Landscape Light Wire Connector
Poor landscape wire connectors can easily become brittle. ✔Our landscape lighting wire connectors are made from
extremely hard nylon and fiberglass with nickel plated pin to ensure your landscape lights work perfectly each, and every
time.
2. Compatable With
Great for low voltage landscape wiring. ✔Replace old faulty connectors found on outside wall mounts, edge, walkway,
garden, fences, downlight, path and patio deck lighting
3. EASY TO INSTALL
NO Splicing/Crimping or tools required! ✔Quickly and easily install two low-voltage cables to your lighting fixture in 5
minutes or less! ✔Taps wires without cutting or crimping, providing a solid and secure connection guaranteed!
4. SUPER LONG LASTING
Best improved design and completely reusable!✔5 Year hassle free warranty

Installation Instructions

Installation Instruction：

1． SHUT DOWN the main power.

2． Cut the exposed coils from the end of 18# cables from light fixture and tuck the cable into the marked

18# opening grooves vertically without excessive distortion.

3． Flip the 18# cable over and snap it into the slot then close the cap.

4． Put the 12# main cable from transformer to connector marked 12# wider opening and be sure the

cable in horizontal way without excessive distortion, and twist tightly the cap.

 

Safety Instructions：

1． PLEASE TURN OFF THE POWER AT THE FUSE BOX OR CIRCUIT BREAKER BEFORE YOU

BEGIN THE INSTALLATION.

2． Make sure that all wires are attached to metal needles, then insert the metal needles into the

conductor when you put the power cord through the connector.

3． If you need to remove the wires from the fixture and then reconnect it to the connector, please insert

the wires into the jack’s bottom through its center. Make sure that the metal needles in the jack

penetrate the insulation to reach the conductor