Product Information Card:
| Name: | Well light fixture | Status: | In production |
| Factory: | Led Story | Model: | UG-LSS02 |
Basic Information:
| Rating： | Ⅲ |
| IP： | Wet |
| Material： | BRASS |
| Color： | Antique bronze |
| Application： | Landscape |
Configuration Information:
| Bulb： | MR16 |
| Socket： | G6 |
Package Information:
| Inner packaging | Carton packaging |
| Within size： | |
| Carton size： | |
| Quantity： | |
| N.W.： | 0.81 KGS |
| G.W.： |
Product Tags:
| Model Label | Custom | Size | Custom |
| Material | Custom | ||
| Cap Label | Custom | Size | Custom |
| Material | Custom |
Safety Instructions：
• Turn power OFF or unplug fixture and allow it to cool before replacing lamp.
• Lamp gets HOT quickly. Contact only switch/plug when turning on.
• Do not touch hot lens, guard, or fixture housing until it has cooled.
• Keep lamp away from combustibles.
• The inner module is very hot, do not touch it until it cools down
• Do not operate the fixture fitting with a missing or damaged shield.
• For outdoor use only.
• Make sure the power is turned OFF before installing or servicing this fixture.
Installation Instruction：
• Disconnect the transformer from the main supply
• Remove the shield from the retaining housing
• Assemble the internal mold into the lamp and connect it with a connector (if required)
• Install the cover and rotate the cover on the housing to fix it on the fixture housing to make sure the leak hole is in the middle and down
• Connect the cable to the main line through the ground plug
