MR16 bulb
MR16 bulb

MR16 bulb

    • Mode: MR16
    • Material: Ceramic
    • Beam Spread: 24˚ 36˚
    • Color Temp.: 2700K/3000K
    • Type: CREE COB
    • Operating Voltage: 9V – 15V
    • Color: White, Black
    • Wattage: 3W, 5W, 7W
    • Lumen Output: 240LM, 400LM,560LM

    Download Specification:  led

      Product Information Card:

      Name: MR16 bulb Status: In production
      Factory: Led Story Model: MR16

      Basic Information:

      Rating： Ⅲ
      IP： Wet
      Material： Ceramic
      Color： White
      Application： Landscape

      Configuration Information:

      LED： CREE COB
      Power： 3W,5W
      Voltage： 9-15V
      Flux： 240lm,400lm
      Efficiency： 80lm/w
      CCT： 2700K/3000K
      Angle： 24,36
      LED PCS： 1

      Package Information:

      Inner packaging Carton plus plastic packaging
      Within size： 5.5*5.5*6.7 CM
      Carton size： 30*30*15.5 CM
      Quantity： 50
      N.W.： 3.5 KGS
      G.W.： 4.2 KGS

      Product Tags:

      Model Label Custom Size Custom
      Material Custom
      Cap Label Custom Size Custom
      Material Custom
      MR16 bulb Spec

      Installation Instructions

      Safety Instructions：
      • Turn power OFF or unplug fixture and allow it to cool before replacing lamp.
      • Lamp gets HOT quickly. Contact only switch/plug when turning on.
      • Do not touch hot lens, guard, or fixture housing until it has cooled.
      • Keep lamp away from combustibles.
      • The inner module is very hot, do not touch it until it cools down
      • Do not operate the fixture fitting with a missing or damaged shield.
      • For outdoor use only.
      • Make sure the power is turned OFF before installing or servicing this fixture.

      Installation Instruction：
      • Disconnect the transformer from the main supply
      • Remove the shield from the retaining housing
      • Assemble the internal mold into the lamp and connect it with a connector (if required)
      • Install the cover and rotate the cover on the housing to fix it on the fixture housing to make sure the leak hole is in the middle and down
      • Connect the cable to the main line through the ground plug